meta name="alexaVerifyID" content="EEHj3WdsJzLD-BpKyJ-bytRQaJ4" /> make your own blog
Featured Articles
All Stories

الثلاثاء، 27 أغسطس 2013






Usually suffers mobile phone users than double the speaker volume, especially when watching movies or listening to songs, and if you are looking for a solution to that problem, here's a way to strengthen the sound using a regular plastic cup.


The materials used

• plastic cup

• hair clips

• sharp blade


Steps

 


1) synaptic bring the hair and put them on a flat surface.

 

2) Flex Clamp one end to create a character "L".

 


3) Flex-third inch from the bottom of the letter "L" to form the letter "U".

 


4) قم بإحضار الكوب البلاستيكي واصنع به فتحة على شكل مستطيل باستخدام

الشفرة حسب أبعاد السماعة ومكان تواجدها في أسفل الهاتف الجوال أو أعلاه.
 

5) then cracks in the glass-making, where you'll need to 4 incisions about earphone slot

Mobile phone input and output, including hair clips.

6) Insert the hair clips in their own cracks. 

7) your using Salim hair clip prop by placing the parties who clamps

You entered in the cup to install the tool works.

 

8) Place the mobile phone between the two clamps and be sure to make speakers

Into the slot on the plastic cup, then enjoy a stronger voice while watching

Film on the phone or listening to a song.

How to strengthen the voice of your mobile phone using a plastic cup






Usually suffers mobile phone users than double the speaker volume, especially when watching movies or listening to songs, and if you are looking for a solution to that problem, here's a way to strengthen the sound using a regular plastic cup.


The materials used

• plastic cup

• hair clips

• sharp blade


Steps

 


1) synaptic bring the hair and put them on a flat surface.

 

2) Flex Clamp one end to create a character "L".

 


3) Flex-third inch from the bottom of the letter "L" to form the letter "U".

 


4) قم بإحضار الكوب البلاستيكي واصنع به فتحة على شكل مستطيل باستخدام

الشفرة حسب أبعاد السماعة ومكان تواجدها في أسفل الهاتف الجوال أو أعلاه.
 

5) then cracks in the glass-making, where you'll need to 4 incisions about earphone slot

Mobile phone input and output, including hair clips.

6) Insert the hair clips in their own cracks. 

7) your using Salim hair clip prop by placing the parties who clamps

You entered in the cup to install the tool works.

 

8) Place the mobile phone between the two clamps and be sure to make speakers

Into the slot on the plastic cup, then enjoy a stronger voice while watching

Film on the phone or listening to a song.

Posted at 2:32 م |  by Unknown




If esta in a place devoid of human beings The first thing you will think is directed by your mobile phone and you try to connect to a request for help from friends or the competent authorities, but what if the battery is finished and unfit for work? To find out the solution and method of recharging the battery again using solar energy .. followed us the following lines.

1) At first we will need for a range of equipment, namely: phone charger, power regulator, and 9-volt solar panels.

2) The second step is planning, planning is not difficult at all, as some believe, energy is interference from the left and the flow through the diode and make their way to the left leg of structured energy, and sends the surplus of power and heat to the pin is placed in the middle of the network, which comes out 5 volts of energy on a regular basis.

3) capacitors used in ensuring the stability of the energy level with all of this effort and also reduce heat dissipation, and to test the network correctly, Baasalha the solar panels and energy displayed by 9 to 12 volts and you'll find the energy output rate of approximately 5 volts.

4) Then we move on to step Welding, to keep the generator alive is installed panel E, as shown in the picture - Make sure to leave mounting holes so you can hook portions of the bottom of the panel - may also need to cover all connections electrical tape or using hot glue to avoid damage by rust or exposure to water.

5) After completion of the above-mentioned things, disconnect the phone charger cord and secure it on the electronic board to come out of energy by approximately 5 volts.

6) to install the electronics we first connect the solar panel using epoxy, and you may have to make small holes in the plate to be able to wire inserted into the box, and then after that, make sure to install a good place allocated.

7) Now you can charge your phone using solar energy by exposing to the sun and wait for quite some time until the battery is charged and can be used again.

How are shipped solar phone battery





If esta in a place devoid of human beings The first thing you will think is directed by your mobile phone and you try to connect to a request for help from friends or the competent authorities, but what if the battery is finished and unfit for work? To find out the solution and method of recharging the battery again using solar energy .. followed us the following lines.

1) At first we will need for a range of equipment, namely: phone charger, power regulator, and 9-volt solar panels.

2) The second step is planning, planning is not difficult at all, as some believe, energy is interference from the left and the flow through the diode and make their way to the left leg of structured energy, and sends the surplus of power and heat to the pin is placed in the middle of the network, which comes out 5 volts of energy on a regular basis.

3) capacitors used in ensuring the stability of the energy level with all of this effort and also reduce heat dissipation, and to test the network correctly, Baasalha the solar panels and energy displayed by 9 to 12 volts and you'll find the energy output rate of approximately 5 volts.

4) Then we move on to step Welding, to keep the generator alive is installed panel E, as shown in the picture - Make sure to leave mounting holes so you can hook portions of the bottom of the panel - may also need to cover all connections electrical tape or using hot glue to avoid damage by rust or exposure to water.

5) After completion of the above-mentioned things, disconnect the phone charger cord and secure it on the electronic board to come out of energy by approximately 5 volts.

6) to install the electronics we first connect the solar panel using epoxy, and you may have to make small holes in the plate to be able to wire inserted into the box, and then after that, make sure to install a good place allocated.

7) Now you can charge your phone using solar energy by exposing to the sun and wait for quite some time until the battery is charged and can be used again.

Posted at 2:24 م |  by Unknown




If you're having trouble with your spending ways, or always hit the end of the bemused by until the middle of the month to be forced to borrow from friends and relatives, here are some tips that may reduces Asravk.

1) In the beginning you to recognize Basravk, usually considered ugly must be disposed of, recognition of the first steps of treatment.
2) If you are fond of buying things always remember that you end up convicted.
3) prepared yourself and those close to you that you would stop spending lavishly.
4) Set yourself an amount of money you want to be saved, and this will help you to not spending.
5) Place the part of the confused, half or a quarter, in one of the banks do not even approaching it.
6) Buy only what you need and do not conduct random purchasing do not find useful.
7) Record what you have by spending and intend to buy it in small forums to organize the procurement process.
8) Do not carry a lot of money while shopping.
9) Think consequences Asravk in the future, you will be able to marry or move from your family home .. Etc..
10) if it succeeds in saving the amount of money not Tserfh whole, just by taking a small percentage of it to celebrate achievement by going to a fancy restaurants or other places.
11) If you find yourself penniless not borrow from them and make this a hard lesson bankruptcy for you so do not go overboard in the future.
12) Use paper money when the exchange rather than credit card until you're spending more realistic.

How limit of extravagant spending





If you're having trouble with your spending ways, or always hit the end of the bemused by until the middle of the month to be forced to borrow from friends and relatives, here are some tips that may reduces Asravk.

1) In the beginning you to recognize Basravk, usually considered ugly must be disposed of, recognition of the first steps of treatment.
2) If you are fond of buying things always remember that you end up convicted.
3) prepared yourself and those close to you that you would stop spending lavishly.
4) Set yourself an amount of money you want to be saved, and this will help you to not spending.
5) Place the part of the confused, half or a quarter, in one of the banks do not even approaching it.
6) Buy only what you need and do not conduct random purchasing do not find useful.
7) Record what you have by spending and intend to buy it in small forums to organize the procurement process.
8) Do not carry a lot of money while shopping.
9) Think consequences Asravk in the future, you will be able to marry or move from your family home .. Etc..
10) if it succeeds in saving the amount of money not Tserfh whole, just by taking a small percentage of it to celebrate achievement by going to a fancy restaurants or other places.
11) If you find yourself penniless not borrow from them and make this a hard lesson bankruptcy for you so do not go overboard in the future.
12) Use paper money when the exchange rather than credit card until you're spending more realistic.

Posted at 2:20 م |  by Unknown







Take pictures or video from inside the car is difficult without the presence of the necessary equipment, and the camera mode safely out of the car is very expensive, but fortunately there are many stabilizers cameras that you can manufacture your own cheaply.


1) installed the dashboard and car plate


د

Video production company "MHN Productions" invented installed the camera placed over the

Instrument panel and another for the license plate to get the mineral from the outside scenes,

You'll need to wooden board feet of rubber and nail to install a camera above

The counter, and the other is a metal in the form of an "L" set in the car plate

For an excellent external shots like the pros.


2) Announcement of sponge

The idea does not cost more than $ 10, equivalent to 37.5 SR, for making Sticky

Camera counters panel of sponges and a small cut Carpets to prevent Tzhalgaha, as well as

To some weights in the case of the use of lightweight camera, where the batteries can be used stones

Great description of coins to give the necessary weight of the installed.

 


3) installed headrest

 t

You can Sticky making camera b headrest car in 10 minutes, where everything you need

Pipe is 3 \ 4 inch, nails shaped "U" is placed on the vertical

Headrest, Wolf nuts own nails to install, with a nail to install

Camera in the pipe where you want to place the camera.

 

4) installed magnetic

A wonderful idea and simple to install the camera on the outside of the car, which is about

With magnet disk strong position to ascertain on the metal surface of the car outside

And has a nail to prove the camera.

 

5) pipette pump to install the cameraا



From the simple and easy ways: Use absorbent such as pump to suspend things on
Walls, thanks to its ability to pull the air, where you can install the camera across the nail
And put it on the roof of the car to get fixed excellent shots.

How manufactured stabilizers camera in the car on your own







Take pictures or video from inside the car is difficult without the presence of the necessary equipment, and the camera mode safely out of the car is very expensive, but fortunately there are many stabilizers cameras that you can manufacture your own cheaply.


1) installed the dashboard and car plate


د

Video production company "MHN Productions" invented installed the camera placed over the

Instrument panel and another for the license plate to get the mineral from the outside scenes,

You'll need to wooden board feet of rubber and nail to install a camera above

The counter, and the other is a metal in the form of an "L" set in the car plate

For an excellent external shots like the pros.


2) Announcement of sponge

The idea does not cost more than $ 10, equivalent to 37.5 SR, for making Sticky

Camera counters panel of sponges and a small cut Carpets to prevent Tzhalgaha, as well as

To some weights in the case of the use of lightweight camera, where the batteries can be used stones

Great description of coins to give the necessary weight of the installed.

 


3) installed headrest

 t

You can Sticky making camera b headrest car in 10 minutes, where everything you need

Pipe is 3 \ 4 inch, nails shaped "U" is placed on the vertical

Headrest, Wolf nuts own nails to install, with a nail to install

Camera in the pipe where you want to place the camera.

 

4) installed magnetic

A wonderful idea and simple to install the camera on the outside of the car, which is about

With magnet disk strong position to ascertain on the metal surface of the car outside

And has a nail to prove the camera.

 

5) pipette pump to install the cameraا



From the simple and easy ways: Use absorbent such as pump to suspend things on
Walls, thanks to its ability to pull the air, where you can install the camera across the nail
And put it on the roof of the car to get fixed excellent shots.

Posted at 2:09 م |  by Unknown





How do you believe your home by scented candles, is one of the means commonly used in homes to get rid of odors and get the smell help on liquidation of mind and create a romantic atmosphere, it is also easy to manufacture inside the house with little cost.

1) first brought the fuse, and then install it on the base of the wick through the hole the size of about 1.5 inches up to the foam base at the bottom.
2) Put the other end of the wick through the hole at the bottom of the base of the candle, and then drag it by the narrow aperture, you can get around the rule in the end using a wick to prevent him from moving from his place when using a candle.
3) Add boiling water to the base of the candle, scented oil used in the upper right next to the wick.
4) dissolving the entire candle and then placed in a mold until you reach the top, and then cut the wick from the bottom.
5) solution node at the bottom of the mold, then extracted the candle and enjoy the smell smart.
6) When the mold is filled must be left to cool in a safe place away from children, or in the refrigerator, because a serious injury and will cause painful burns.
7) When you come to the stage melt the wax, remember that you want that melt the candle and put it in a new template only, so do not let boil too much and only burn automatically.

How to make scented candles at home






How do you believe your home by scented candles, is one of the means commonly used in homes to get rid of odors and get the smell help on liquidation of mind and create a romantic atmosphere, it is also easy to manufacture inside the house with little cost.

1) first brought the fuse, and then install it on the base of the wick through the hole the size of about 1.5 inches up to the foam base at the bottom.
2) Put the other end of the wick through the hole at the bottom of the base of the candle, and then drag it by the narrow aperture, you can get around the rule in the end using a wick to prevent him from moving from his place when using a candle.
3) Add boiling water to the base of the candle, scented oil used in the upper right next to the wick.
4) dissolving the entire candle and then placed in a mold until you reach the top, and then cut the wick from the bottom.
5) solution node at the bottom of the mold, then extracted the candle and enjoy the smell smart.
6) When the mold is filled must be left to cool in a safe place away from children, or in the refrigerator, because a serious injury and will cause painful burns.
7) When you come to the stage melt the wax, remember that you want that melt the candle and put it in a new template only, so do not let boil too much and only burn automatically.

Posted at 1:55 م |  by Unknown





If you want to secure your home at the lowest cost and through the camera to your computer, you can follow the steps below to make it easier for you this task.

1) First, you must examine your home to identify the places that need to be secure or a surveillance camera.

2) Be sure to find out if you need to control camera outside the home or not, if you live in a "villa" You can put the external surveillance camera, and look for the surveillance program is right for you.

3) Learn monitoring tools, specifically on the types of cameras that you need, you can use the computer Wireless cameras because it will facilitate the monitoring mission even if it cost the largest amount of money.

4) Calculate the number of cameras you will need and check the Internet you have to know if they will cover all the cameras planted.

5) Place the surveillance cameras in places that you selected when you examine your home and make sure that the camera is in a position detector of the place and the quality and clear.

6) Prepare the camera to work with the Wi Fi network that you have, you must also be careful to secure the Internet to have a strong password so that no one is of pirates infiltration.

7), download some software and surveillance applications on your computer, the caller cameras planted.

8) Prepare the program fits cameras developed by.

9) will then be able to control all throughout the home via your computer.

How do you believe your home by your computer






If you want to secure your home at the lowest cost and through the camera to your computer, you can follow the steps below to make it easier for you this task.

1) First, you must examine your home to identify the places that need to be secure or a surveillance camera.

2) Be sure to find out if you need to control camera outside the home or not, if you live in a "villa" You can put the external surveillance camera, and look for the surveillance program is right for you.

3) Learn monitoring tools, specifically on the types of cameras that you need, you can use the computer Wireless cameras because it will facilitate the monitoring mission even if it cost the largest amount of money.

4) Calculate the number of cameras you will need and check the Internet you have to know if they will cover all the cameras planted.

5) Place the surveillance cameras in places that you selected when you examine your home and make sure that the camera is in a position detector of the place and the quality and clear.

6) Prepare the camera to work with the Wi Fi network that you have, you must also be careful to secure the Internet to have a strong password so that no one is of pirates infiltration.

7), download some software and surveillance applications on your computer, the caller cameras planted.

8) Prepare the program fits cameras developed by.

9) will then be able to control all throughout the home via your computer.

Posted at 1:46 م |  by Unknown




Conservation or remember names is a must in many areas, and to avoid exposure to an embarrassing problem because of forgetfulness, you helpful tips you've strengthening memory and help you to remember the most important thing going through your whole life.

1) Buy a pack of scraps of paper used to write notes, select the category of small or large depending on the nature of the information that you want to remember.

2) Write some information on each sheet, until the end of the details are completely that want Ptzla throughout the time.

3) Write notes that allude to always forget things, like words remind you of what you say in front of your boss at work, or quotations and information that you should stop then like the end of the paragraph or move to a new idea and so on.

4) Put these observations in place a clear pass it every day more than once, such as a radiator or your desk at work or a computer screen.

5) read the notes that you typed in the order each time period, and tried to repeat it 5 times each day so you can save the details completely, then moved to the following information.

6) Repeat step four with new details are trying to save them for the first time.

7) After a period of training, your mind will become accustomed to receiving new information all the way followed by the period.

8) Enjoy your time in keeping all the details that you want, and try to remember things in a random manner to ensure the authenticity of what I did.

How quickly reservation





Conservation or remember names is a must in many areas, and to avoid exposure to an embarrassing problem because of forgetfulness, you helpful tips you've strengthening memory and help you to remember the most important thing going through your whole life.

1) Buy a pack of scraps of paper used to write notes, select the category of small or large depending on the nature of the information that you want to remember.

2) Write some information on each sheet, until the end of the details are completely that want Ptzla throughout the time.

3) Write notes that allude to always forget things, like words remind you of what you say in front of your boss at work, or quotations and information that you should stop then like the end of the paragraph or move to a new idea and so on.

4) Put these observations in place a clear pass it every day more than once, such as a radiator or your desk at work or a computer screen.

5) read the notes that you typed in the order each time period, and tried to repeat it 5 times each day so you can save the details completely, then moved to the following information.

6) Repeat step four with new details are trying to save them for the first time.

7) After a period of training, your mind will become accustomed to receiving new information all the way followed by the period.

8) Enjoy your time in keeping all the details that you want, and try to remember things in a random manner to ensure the authenticity of what I did.

Posted at 1:25 م |  by Unknown
Blogger templates. Proudly Powered by Blogger.
back to top