If esta in a place devoid of human beings The first thing you will think is directed by your mobile phone and you try to connect to a request for help from friends or the competent authorities, but what if the battery is finished and unfit for work? To find out the solution and method of recharging the battery again using solar energy .. followed us the following lines.
1) At first we will need for a range of equipment, namely: phone charger, power regulator, and 9-volt solar panels.
2) The second step is planning, planning is not difficult at all, as some believe, energy is interference from the left and the flow through the diode and make their way to the left leg of structured energy, and sends the surplus of power and heat to the pin is placed in the middle of the network, which comes out 5 volts of energy on a regular basis.
3) capacitors used in ensuring the stability of the energy level with all of this effort and also reduce heat dissipation, and to test the network correctly, Baasalha the solar panels and energy displayed by 9 to 12 volts and you'll find the energy output rate of approximately 5 volts.
4) Then we move on to step Welding, to keep the generator alive is installed panel E, as shown in the picture - Make sure to leave mounting holes so you can hook portions of the bottom of the panel - may also need to cover all connections electrical tape or using hot glue to avoid damage by rust or exposure to water.
5) After completion of the above-mentioned things, disconnect the phone charger cord and secure it on the electronic board to come out of energy by approximately 5 volts.
6) to install the electronics we first connect the solar panel using epoxy, and you may have to make small holes in the plate to be able to wire inserted into the box, and then after that, make sure to install a good place allocated.
7) Now you can charge your phone using solar energy by exposing to the sun and wait for quite some time until the battery is charged and can be used again.
.jpg)
About the Author
0 التعليقات: