How manufactured stabilizers camera in the car on your own

Take pictures or video from inside the car is difficult without the presence of the necessary equipment, and the camera mode safely out of the car is very expensive, but fortunately there are many stabilizers cameras that you can manufacture your own cheaply.

1) installed the dashboard and car plate

د

Video production company "MHN Productions" invented installed the camera placed over the

Instrument panel and another for the license plate to get the mineral from the outside scenes,

You'll need to wooden board feet of rubber and nail to install a camera above

The counter, and the other is a metal in the form of an "L" set in the car plate

For an excellent external shots like the pros.

2) Announcement of sponge

The idea does not cost more than $ 10, equivalent to 37.5 SR, for making Sticky

Camera counters panel of sponges and a small cut Carpets to prevent Tzhalgaha, as well as

To some weights in the case of the use of lightweight camera, where the batteries can be used stones

Great description of coins to give the necessary weight of the installed.

 

3) installed headrest

 t

You can Sticky making camera b headrest car in 10 minutes, where everything you need

Pipe is 3 \ 4 inch, nails shaped "U" is placed on the vertical

Headrest, Wolf nuts own nails to install, with a nail to install

Camera in the pipe where you want to place the camera.

 

4) installed magnetic

A wonderful idea and simple to install the camera on the outside of the car, which is about

With magnet disk strong position to ascertain on the metal surface of the car outside

And has a nail to prove the camera.

 

5) pipette pump to install the cameraا

From the simple and easy ways: Use absorbent such as pump to suspend things on

Walls, thanks to its ability to pull the air, where you can install the camera across the nail

And put it on the roof of the car to get fixed excellent shots.